Language
Currency
Language
SENNHEISER HMD 300-XQ-2 BROADCAST HEADSET
Out of stock
4044155208542
KD 99.95
- Circumaural, Sound-Isolating Design
- Up to 32 dB Passive Noise Reduction
- Padded Headset for Prolonged Listening
- 60 Hz to 25 kHz Frequency Response
- Hypercardioid Dynamic Boom Microphone
- 80 Hz to 16 Hz Frequency Response on Mic
- Adjustable Audio Range of 45 dB on Mic
- Switchable ActiveGard Hearing Protection
- Cable Design Minimizes Handling Noise
- 6.6' Cable with XLR & 1/4" Jacks
The Sennheiser HMD 300 XQ-2 is comprised of the HMD 300 Pro communications headset and the Cable-II-X3K1-Gold headset cable. The headset's closed-back, over-ear design provides up to 32 dB of passive noise attenuation while the padded headband and earcups ensure comfortable wearing. The detachable 6.6' straight cable features a coiled section to mitigate handling noise. It utilizes copper wiring and is terminated with gold-plated XLR 3-pin and 1/4" jacks.
Sennheiser HMD 300 Pro Headset with Boom Microphone (Without Cable)
The Sennheiser HMD 300 PRO is a closed-back, circumaural communications headset with a sonic design based on the HD 250 linear headphones, giving you a detailed, linear response. The headset features a comfortable construction with split-headband padding to remove pressure from sensitive areas of the head.
With a frequency response of 60 Hz to 25 kHz, the headphones provide clear reproduction of audio, doing so while offering up to 32 dB of passive noise reduction. The headset offers a dynamic boom microphone, one that delivers a hypercardioid polar pattern for focusing on vocals, and a frequency range centered around picking up the human voice in communication settings (80 Hz to 16 kHz). You can adjust the gain of the microphone in 5 dB steps over a range of 45 dB in total.
The headband supporting the unit's earcups is rugged, bendable, and twistable, and the boom can be worn on either side of the headset. To preserve your hearing, the headset features a switchable noise-protection mode called ActiveGard that protects against sudden bursts of sound without interrupting the signal.
The HMD 300 Pro sports a modular cable design to accommodate multiple pin-outs and configurations. Though no cable is included with the headset, each of the compatible cables sport a design that minimizes handling noise; this is achieved with a small series of coils on the cable approach that decouple the cable from the headset.
ActiveGard Technology
- This sound compression system consists of an electrical circuit incorporated into analogue headsets.
- Compression technology removes the energy from an excessive incoming signal transmitted through the communication system, leaving the signal free of distortion.
- The ActiveGard circuit can be compared to an automatic and fast-working “intelligent” volume control. If an incoming signal rises to a level that is harmful to your hearing, it is instantly “turned down” to a lower, more comfortable level.
- When the incoming signal returns to safe levels, ActiveGard reverts to its stand-by surveillance mode and volume is restored to its original level.
Key Features at a Glance
- Switchable ActiveGard mode for hearing protection
- Linear sound reproduction optimized for speech intelligibility
- Microphone can be worn either on right or left side
- Comfortable padding design allows for extended use in long wearing sessions
- Passive ambient noise attenuation due to closed earcup construction
- Foldable earcup design
Sennheiser Cable-II-X3K1-Gold Straight Cable with XLR & 1/4" Connectors for HMD Headsets (6.6')
The 6.6' Sennheiser Cable-II-X3K1-Gold is a straight copper cable with XLR and 1/4" connectors designed for use with select Sennheiser HMD and HME headsets in broadcast and communications applications. With a proprietary connector at the headset end and XLR 3-pin and 1/4" jacks at the other, it is compatible with HMD 300/301 Pro, HMD/HME 26-II, and HMD/HME 27 Pro headsets.
It utilizes copper wire and gold-plated contacts to enhance conductivity while maintaining a flexible shield. A coiled section reduces handling noise and the aramid reinforcement delivers increased durability.
Compatible with HMD 300 Pro, HMD 301 Pro, HMD 26-II, HME 26-II, HMD 27 Pro, and HME 27 Pro headsets
Straight copper cable with coiled segment to eliminate structure-born noise
Reinforced with aramid for improved durability
Softer shield enhances flexibility
Write Your Own Review
Remind me later