Language
Currency
Language
SMALLRIG 4383 WEIGHT-REDUCING SLING HANDGRIP KIT FOR DJI RS 4 / RS 4 Pro / RS 3 / RS 3 PRO / RS 2
Limited Quantity
6941590014449
Only 1 left
KD29.95
- Sling Handle, Cross-Body Strap
- Baseplate with 1/4"-20 Screw Mount
- NATO Rail, Multiple 1/4"-20 Threads
- 13.2 lb Payload Capacity
- 3/8"-16 ARRI-Style Locating Threads
- Curved Grip with Anti-Slip Silicone
- Quick Detach (QD) Strap Mounts
Capture low-angle shots with your gimbal using the Sling Handle Kit with Weight-Reducing Shoulder Strap from SmallRig. Designed to reduce the strain on your arms when using the DJI RS 2, RSC 2, RS 3, RS 3 Pro, or RS 3 Mini, this kit includes an adjustable sling handle, weight-reducing adjustable shoulder strap, and a baseplate.
The sling handle supports up to 13.2 lb and provides 180° adjustment, multiple 1/4"-20 threads, 3/8"-16 ARRI-style threads, two shoe mounts, and a NATO rail with locating pin. The strap slings around your shoulder or body and mounts onto the baseplate using QD mounts, and the baseplate mounts onto the 1/4"-20 thread at the base of your gimbal.
SmallRig 3028C Sling Handle for DJI RS 2, RSC 2, RS 3, RS 3 Pro & RS 3 Mini
Capture low-angle shots with your gimbal using the 3028C Sling Handle from SmallRig. Designed to work specifically with the DJI RS 2, RSC 2, RS 3, RS 3 Pro, or RS 3 Mini, this handle boasts multiple 1/4"-20 threaded holes, ARRI-type 3/8"-16 location holes, two cold shoe mounts, and a NATO rail with locating pin. The angle of the handle may be adjusted to 180° via a ratchet knob, allowing it to be employed as a side handle, and the curved grip is protected with anti-slip silicone.
SmallRig Weight-Reducing Shoulder Strap for DJI RS 3, RS 3 Pro & RS 2
Take the load off your arms when using the DJI RS 3, RS 3 Pro, or RS 2 handheld gimbal stabilizer with this Weight-Reducing Shoulder Strap from SmallRig. The polyester strap is adjustable from 36 to 59" and can be worn around your neck, over your shoulder, or cross-body. The strap features two QD (Quick Detach) mounts that rotate and connect to the central baseplate, and the baseplate is required to connect to separately available SmallRig or DJI sling handgrips or other grips with 1/4"-20 threads.
The baseplate connects to the bottom of the gimbal using a 1/4"-20 screw, and on the bottom of the plate, there are 1/4"-20 and 3/8"-16 threads for mounting on a rig or tripod. When slung around your neck, it can be let go to rest when not in use. The strap supports loads up to 66 lb.
Write Your Own Review
Remind me later